SPINDLE TURRET LABEL SLITTER REWINDER<>Material to be run: Die-cut self-adhesive LABELS <>Material maximum width: 520mm<>Unwind core i/d: 3 inch<>Slitting facilities: Driven Rotary shear slitting<>Minimum slit width: 20mm<>Tolerance: 0 to 0.38mm <>Rewind: 4 positioned turret<>Rewind starts I/D: 25mm, 40mm, and 76mm<>Maximum rewind diameter: 16 inches in 4 spindle mode<>Maximum machine speed: 250m/minute<>N.B. Machine speed is dependent upon the material to be run, material quality finished reel profile, and operator skills.<>Cut and transfer: 100m/min (40mm and 76mm cores); 90m/min (25mm cores)<>Rewind shafts: Lug-type air shafts, 4 x each core size listed<>Minimum cycle time: 25 seconds (based on 5 x slit lanes across) <>1 off Base 4 Spindle Opal 520 Turret with 800mm <>unwind diameter including 3 inches airshaft and web guide<>(off-line model) <>Motorized unwind reel lift <>10 sets of rotary shear-slitting knives <>4 x 25mm rewind airshafts <>4 x 76mm rewind airshafts <>Glue-less cinch start facility <>Label tail closure (standard system - no print) <>Automatic core loader via chute system for <>25mm, 40mm, and 76mm ID cores (OD 31mm, 46mm, 82mm) <>Additional Contrast sensor for cycle cut to mark feature <>Rewind shaft support during the turret cycle <>Automatic rewind offload system to offload chute <>Counter off during run facility via pushbutton